Answers are grounded in this paper and cite their sources.
This research demonstrates, for the first time, the development of highly uniform resistive switching devices with self-compliance current for conductive bridge random access memory using two-dimensional electron gas (2DEG) at the interface of an Al2O3/TiO2 thin-film heterostructure via atomic layer deposition (ALD). The cell is composed of Cu/Ti/Al2O3/TiO2, where Cu/Ti and Al2O3 overlayers are used as the active/buffer metals and solid electrolyte, respectively, and the 2DEG at the interface of Al2O3/TiO2 heterostructure, grown by the ALD process, is adopted as a bottom electrode. The Cu/Ti/Al2O3/TiO2 device shows reliable resistive switching characteristics with excellent uniformity under a repetitive voltage sweep (direct current sweep). Furthermore, it exhibits a cycle endurance over 107 cycles under short pulse switching. Remarkably, a reliable operation of multilevel data writing is realized up to 107 cycles. The data retention time is longer than 106 s at 85 °C. The uniform resistance switching characteristics are achieved via the formation of small (∼a few nm width) Cu filament with a short tunnel gap (<0.5 nm) owing to the 2DEG at the Al2O3/TiO2 interface. The performance and operation scheme of this device may be appropriate in neuromorphic applications.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: