Answers are grounded in this paper and cite their sources.
The reaction of preadsorbed CO with O2 and the simultaneous O2 reduction reaction (ORR) on a carbon supported Pt catalyst (20%Pt/Vulcan) in an O2-saturated electrolyte at potentials of 0.06 V and, for comparison, at 0.26 VRHE were investigated by electrochemical measurements in a dual thin-layer flow cell under continuous flow conditions. Following a previous differential electrochemical mass spectrometry study (J. Electroanal. Chem. 2003, 554−555, 427), which demonstrated very slow CO2 formation, in combination with significant O2 consumption, even at the most cathodic potential (0.06 VRHE), we here show that the O2 consumption on the COad-saturated catalyst is due to almost exclusive H2O2 formation. Both the CO oxidation rate and the selectivity for H2O2 formation decrease with lower COad coverage, reaching slightly above 25% at the limiting coverage of 80% of the saturation value (0.6 monolayers). The experimental observations are explained by a mechanism, where H2O2 formation and, with a much lower probability, reaction with a neighboring COad occur upon O2 adsorption in monomer vacancies. For O2 adsorption on larger vacancy islands dissociative adsorption and subsequent H2O formation prevails, reaction with COad at the perimeter of the vacancy island is practically inhibited. Consequences for the air bleed operation of polymer electrolyte fuel cells are discussed.
No takes yet. Share an insight, caveat, or question.
Jusys et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: