Answers are grounded in this paper and cite their sources.
We have achieved a stable module efficiency of 10.2% using amorphous silicon-based alloy in a triple-junction structure. This record performance has been accomplished by improving the component cells, the "tunnel" junction between the component cells, the back reflector, the uniformity over one-square-foot area, and the module design. Further advances have been made in the initial performance of the component cells by using high hydrogen dilution. The top cell, having Jsmall>8 mA/cm/sup 2/, exhibits Voc=1.014 V and FF=0.78. The middle cell, showing Voc=0.757 V and FF=0.719, exhibits Jsc=9.5 mA/cm/sup 2/ under AM 1.5 illumination with a 530 nm cut-on filter. A record initial power output of 4.43 mW/cm/sup 2/ for the bottom cell has been obtained under AM 1.5 with a 630 nm cut-on filter. Light soaking experiments for the improved component cells also show higher stabilized values than previously reported ones.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2002) studied this question.