Answers are grounded in this paper and cite their sources.
We analyse lithium sputtering, evaporation and transport for the National Spherical Torus Experiment (NSTX) liquid lithium divertor (LLD) for planned high heating power plasma conditions. A temperature-dependent, data-calibrated, surface-response model is used to specify sputter yield, velocity distributions, sputtered Li ion fraction and related phenomena, for the static liquid lithium surface with D, Li and trace C impingement. Using the surface-response model, and supplied UEDGE code edge plasma parameters and LLD surface temperature profile for a typical 2 MW heating, low D-recycle shot, the REDEP/WBC code package computes Li erosion/redeposition. The results are encouraging showing negligible Li evaporation, moderate sputter erosion, and acceptable Li transport to the edge (∼7% Li/D density) and core plasma (∼1% Li/D contamination potential) and LLD adjacent surfaces. A 2% carbon plasma content does not significantly affect the LLD surface response. For fixed plasma conditions, but with hypothetically higher surface temperatures than the reference 281 °C peak, an increase to ∼350 °C appears acceptable, thus implying a significant operating temperature margin.
No takes yet. Share an insight, caveat, or question.
Allain et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: