Answers are grounded in this paper and cite their sources.
Evaluation of slurry oil recracking and FCC unit optimization reveals profitable operational strategies.
Fluid catalytic cracking (FCC) is a process that is typically driven toward LPG and naphtha production, but it also produces light cycle oil (LCO), a relevant middle-cut stream that can be incorporated into the diesel pool (provided that the severity of the diesel hydrotreating unit is sufficient to absorb the low-cetane-index LCO stream); thus, for market considerations, the FCC unit may be pushed to increase the LCO/naphtha production ratio. Operating the FCC in the maximum LCO mode requires careful optimization of process conditions to overcome the drawback of increased bottoms (slurry oil). The present work complements a previous one (in which an empirical model for the FCC yield profile exploring the low-conversion region was devised) by discussing the option of slurry oil recracking and an optimization study of the most profitable operating mode. A simplified empirical model for slurry oil cracking was developed from experimental data from a fixed fluidized-bed pilot plant using two samples of slurry oil originally produced at a large-scale FCC pilot plant: (a) from a high-conversion run (21.4 wt % yield of slurry oil) and (b) from a low-conversion run (35.5 wt % yield of slurry oil). The empirical models were coupled with a simplified process simulator and a constrained nonlinear optimization tool, and the evaluation performed indicated that operating the FCC unit at high conversion (thus in maximum naphtha mode) remains more profitable, particularly due to a relatively small increase in LCO yield compared to a large increase in slurry oil yield in maximum middle distillation mode. If any specific circumstance demands for a low-conversion operation in the FCC, the empirical model obtained showed that an ideal path to achieve a lower conversion would be to allow for slurry oil recycling, to keep a high reaction temperature and a high contact time between catalyst and cracked gaseous products in the riser, and to lessen severity through reducing the catalyst-to-oil ratio, e.g., by increasing feed temperature to the riser.
No takes yet. Share an insight, caveat, or question.
Silva et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: