Answers are grounded in this paper and cite their sources.
Experimental investigation demonstrates improved structural performance in hexagonal and square composite elements, suggesting strong application potential.
This study experimentally investigates the structural behavior of hexagonal- and square-shaped composite specimens subjected to vertical compression, vertical tension, and diagonal tension loading. The specimens were fabricated using four- and six-layer alkali-resistant (AR) glass textile reinforcements embedded in a modified cementitious mortar via pull, pour, and roll manufacturing techniques. The mechanical performance of polyvinyl alcohol (PVA) fiber-reinforced composite connectors and steel clamp-type elements was also evaluated at the joints of hexagonal specimens under vertical tension and lateral shear loading. The results show that increasing the number of textile layers significantly enhances structural performance. A 50% increase in textile layers improved load-carrying capacity by up to 56% in compression, 104% in tension, and 216% in diagonal tension. Corresponding increases of approximately 20–42% in ductility and up to 266% in energy dissipation capacity were observed. No failure occurred in the connecting elements, confirming their adequate stiffness, strength, and ductility. In addition, validated three-dimensional finite element models were developed to simulate the response of the hexagonal specimens. Overall, the proposed system demonstrates strong potential for applications such as infill walls, cladding, and sandwich panels due to its favorable strength, ductility, and energy absorption capacity.
No takes yet. Share an insight, caveat, or question.
Arslan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: