Answers are grounded in this paper and cite their sources.
Randomized trial demonstrates improved combustion efficiency in liquid fuel systems, suggesting lower emissions with new injector design.
Advanced fuel injection systems are vital for improving combustion performance and reducing emissions in liquid fuel powered, high-momentum jet-stabilised combustion systems. This paper introduces an additively manufactured (AM) μ -scale annular slit injector with a nominal gap width of 50 μ m realised by laser powder bed fusion in Inconel 718. μ -XRCT measurements confirm a manufacturable width of 52 μ m and reveal a transition towards statistically isotropic circumferential discharge at the slit exit. Compared with conventional dual airblast injection (AB), the μ -slit topology generates more uniformly fine droplets ( d 32 ≈ 10 μ m) and a markedly reduced radial asymmetry in fuel placement. The homogenised annular fuel discharge suppresses sectional bias and intermittency at the nozzle edge while enhancing fuel–air mixing, redistributing clustering length scales, and promoting more robust combustion across variations in jet velocity and fuel loading. Structural variants, e.g. μ -bumps and a low-swirler configuration, further modulate near-field multi-phase interaction and flame anchoring while enhancing overall flame homogeneity. This mixing-optimised stabilisation enhances the symmetry of the OH ∗ -marked heat-release structures and enables stable low-NO x combustion under lean atmospheric conditions. The injector operates with a comparatively low pressure drop with excellent reproducibility across all investigated mass flow rates, facilitating a wide dynamic operating range, yet heat transfer within the μ -channels under elevated preheating conditions requires further investigation. These results establish the AM μ -slit injector as a scalable low-emission architecture for compact jet-stabilised-based micro gas turbine and hybrid aero-engine combustors.
No takes yet. Share an insight, caveat, or question.
Kang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: