Answers are grounded in this paper and cite their sources.
This paper addresses the zero-sequence circulating current control in the multiparalleled three-phase voltage-source inverters. The model of the zero-sequence circulating current in the N-paralleled (N ≥ 3) inverters is derived. It is shown that the circulating current is not only susceptible to the mismatches of circuit parameters, but it is also influenced by the interactions of circulating current controllers used by other paralleled inverters. To eliminate these adverse effects on the circulating current control loop, a coordinate control strategy for the N-paralleled inverter is proposed based on the zero-vector feedforward method with the space-vector pulse width modulation. Moreover, a virtual inverter method is introduced to facilitate the implementation of the proposed controller, which decouples the interactions of circulating current controllers in the paralleled inverters. Finally, experimental results obtained from three-paralleled, grid-connected inverters validate the effectiveness of theoretical analysis and proposed approach. An effective mitigation of the circulating current is demonstrated for the paralleled inverters under the unequal operating conditions.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: