Answers are grounded in this paper and cite their sources.
The scaling of nanosheet (NS) field effect transistors (FETs) from the 12 nm gate length to the ultimate gate length of 10 nm for sub-2 nm nodes brings additional technological challenges. Here, 3D finite element Monte Carlo simulations are employed to explore how to alter the NS architecture to increase the drive current ( <tex-math notation="LaTeX">I_ DD </tex-math>) because the gate scaling to 10 nm results in a decline of the current (by <tex-math notation="LaTeX">10.7 </tex-math>%). <tex-math notation="LaTeX">I_ DD </tex-math> of the 10 nm gate length NS FET will increase by 11% if the maximum n-type source/drain doping reaches <tex-math notation="LaTeX">1× 10²⁰ cm⁻³ </tex-math>, or increase by <tex-math notation="LaTeX">3.8 </tex-math>% if the high- <tex-math notation="LaTeX">κ </tex-math> dielectric layer equivalent oxide thickness (EOT) is less than <tex-math notation="LaTeX">1.0 </tex-math> nm. The reduction in the channel width below 40 nm or the reduction in the channel thickness below 5 nm will substantially decrease IDD. The sub-threshold figures of merit like the sub-threshold slope (SS) will decrease from 75 to 73 mV/dec, while the drain-induced barrier lowering (DIBL) will increase from 32 to 77 mV/V. Finally, the effect of strain to increase the drive current is strongly limited by quantum confinement. <tex-math notation="LaTeX">I_ DD </tex-math> will increase by 3% and by 14% in the 10 nm gate NS FET with the <tex-math notation="LaTeX">110 </tex-math> and <tex-math notation="LaTeX">100 </tex-math> channel orientations, respectively, when a strain of <tex-math notation="LaTeX">0.5 </tex-math>% is applied to the channel, with a negligible increase for larger strain values ( <tex-math notation="LaTeX">0.7 </tex-math>% and <tex-math notation="LaTeX">1.0 </tex-math>%).
No takes yet. Share an insight, caveat, or question.
Alabdullah et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: