Answers are grounded in this paper and cite their sources.
The 2nd international Conference on Two-dimensional Layered Materials was successfully concluded in Hong Kong from 7 to 9 January 2016. We were able to bring together some of the most eminent scientists in the field to share with us their latest research findings. The interest of two-dimensional layered materials (2DLMs) has been growing in an astonishing rate. This special issue contains 24 articles with a balanced number of feature articles (13) and full papers (11), all contributed by the plenary and invited speakers. The content of these papers cover a broad spectrum of the most important aspects in the research of 2DLMs, ranging from the synthesis and characterization of 2DLMs, to their diverse applications in batteries, biosensors, field effect transistors, and optoelectronic devices. Thanks to the recent exciting advances of growth techniques for 2DLMs. The feature article by Chen et al. (article number 1603884) highlights the preparation of vertical and lateral epitaxial heterostructures based 2D nanosheets as well as their potential applications in electronic and optoelectronics. Boron, as a unique element nearest to carbon in the periodic table, can form crystalline 2D nanosheets using chemical vapor deposition. Sun et al. (article number 1603300) review the current status of single layered and few-layered boron sheets and their potential applications in electronics, spintronics, and photoelectronics. Transition-metal dichalcogenides (TMDCs) are an important class of 2DLMs for electronic and optoelectronic applications due to their tunable bandgap and high mobility. The issue contains three independent feature articles (article number 1604093, 1602404, and 1603484) which are dealing with various aspects of TMDC-based field effect transistors (FETs) including doping, contact, defects, interface, and modeling. The main goal is to enhance the performance of the TMDC-based electronic devices. Yang et al. (article number 1602250) contribute a full paper to demonstrate the fabrication of top-gate MoS2 FETs using a self-aligned nanowire technique. The devices exhibit impressive electrical performances. Besides the superior optical, electrical and mechanical properties, 2DLMs have also exhibited intriguing thermal properties, which are critical to enabling a wide range of applications including energy conversion and storage devices. The feature article by Wang et al. (article number 1604134) highlights the unusual layer-dependent thermal properties and phonon transport physics of 2DLMs. The giant anisotropic Raman response of black phosphorus (BP) as well as the introduction of a new method to identifying the orientation of BP using strain is reported by Li and co-workers (article number 1600986). When studying 2DLMs, it is indispensable to measure the thickness or layer number of samples. Li et al. (article number 1604468) reviews various optical techniques employed to determine the thickness of 2DLMs. The authors wish to bridge the gap between the characterization and international standardization for thickness determination of 2DLM flakes and the gap between academia and industry. Ultrafast lasers are powerful tools to control and probe transient processes in 2DLMs. According to the feature article by Ceballos et al. (article number 1604509), in the past 5 years, there has been significant progress on the studies of photodynamic carriers in 2DLMs. The basic understanding of the light-matter interaction in the 2D regime would shed light on optical control of spin and valley dynamics in 2DLMs. In addition, Jin et al. (article number 1601741) report a framework to obtain the intrinsic dipole moment and radiative lifetime of excitions in monolayer WSe2 from absorption measurement. It is found that only ≈4% of excited excitions stay at bright A exciton state. The study of electron spin dynamics in 2DLMs is an emerging field which is also reviewed comprehensively in article number 1604040. Among the 2DLMs, graphene is one of the most promising materials for spintronics. The demonstrated controllable spin Hall effect in silicene enables its application in spintronics. The progress of this field can only be expedited by the development of experimental instrument to disentangle the contribution of spin lifetime from the intrinsic spin relaxation and extrinsic effects. One of the most important applications of 2DLMs is in photodetectors including photoconductors, phototransistors, and photodiodes. Xie et al. (article number 1603886) present a feature article addressing the device designs, mechanisms and performances of the photodetectors. Wan et al. contribute a full paper (article number 1603998) on using electrochemical technique to prepare large-area MoS2 on graphene for high-responsivity photodetectors. A roadmap of utilizing graphene-based bio and chemical sensors is presented by Shivananju et al. (article number 1603918). A wide range of sensors including single-cell detection, neural imaging and optogenetics, colorimetric multifunctional sensors, cancer diagnosis, protein and DNA sensing, and gas sensing are reviewed. Due to the success of 2DLMs, there is a growing interest in synthesizing non-layered materials into 2D structures. Wang and co-workers contribute a feature article (article number 1603254) and highlight the recent progress of 2D non-layered materials, including metals, metal oxides, metal chalcogenides, topological crystalline insulators, organic-inorganic hybrid perovskites, and others. Then some promising applications in catalysis, energy storage and conversion, optoelectronics, and topological crystalline insulators are emphasized. We have received great support and cooperation from Dr. Jovia Jiang, Editor of Advanced Functional Materials for organizing this special issue. Our gratitude goes to the whole editorial office of Advanced Functional Materials. Without their professional and enthusiastic work, this special issue could not possibly have become a reality on time. Last but not least, we are greatly indebted to all the contributing authors of this special issue. We sincerely hope that the readers of Advanced Functional Materials will enjoy this special issue. Shu Ping Lau is a full professor and Head of Department of Applied Physics at the Hong Kong Polytechnic University. He is also the Director of the University Research Facility on Materials Characterization and Device Fabrication. He obtained his Ph.D degree in Materials Engineering from the University of Swansea. His current research interest includes strain engineering in two-dimensional materials such as MoS2 and black phosphorous. Lain-Jong (Lance) Li received his BSc and an MSc in chemistry at National Taiwan University. After 5 years of R&D at Taiwan Semiconductor Manufacturing Company (1997–2002), he obtained his PhD of condensed matter physics at Oxford University in 2006. He was an assistant professor in Nanyang Technological University (2006–2009). He is now a full professor at King Abdullah University of Science and Technology. His main research interests are Li-sulfur batteries, chemical vapor deposition, the synthesis of two-dimensional materials, and their applications in electronics and energy-related applications. Yang Chai received his PhD from the Hong Kong University of Science and Technology in 2009. After he conducted his postdoctoral studies in Stanford University and the University of Illinois at Urbana & Champaign, he joined the Department of Applied Physics in the Hong Kong Polytechnic University in 2012. His current research interests include two-dimensional layered materials and devices.
No takes yet. Share an insight, caveat, or question.
Lau et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: