Answers are grounded in this paper and cite their sources.
Modeling transient subsurface flow along the soil-bedrock interface and the subsequent mounding of porewater pressure head in the slope toe zone is key to a successful prediction of rainfall-induced shallow slope failure and debris flow initiation. To this end, finite element analyses are performed on some model slopes subjected to artificial rainfall using calibrated soil-water characteristic curves (SWCCs) and soil permeability functions (SPFs). Analytical results highlighted the importance of lateral subsurface flow in modeling rainfall-induced shallow slope failure, which cannot be adequately simulated using one-dimensional seepage models. Analytical results also revealed that the formation of a saturated zone and an outward subsurface flow over the entire length of the soil-bedrock interface signals rapid slope mass wasting. Results of a comparative study showed that an accurate modeling of time-dependent subsurface water table development requires modifications to the analytical boundary conditions induced by the wash-away of the slope toe. An accurate physical model of shallow slope failures requires further works to address this issue.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: