Answers are grounded in this paper and cite their sources.
Many existing factors are found to affect the factor of safety (FS) for slope stability analysis due to the different analysis methods employed. Even when the same analysis method is used, such as finite element (FE) method; if the element type, node number, boundary conditions, and model dimensions change, different FS numbers will be present. The remarkable improvement on computational tools makes three-dimensional (3-D) FE approaches easier to access. Therefore, the purpose of this paper is to present the advantages of 3-D FE techniques used in slope stability analysis in terms of geometry and boundary conditions. Furthermore, this paper presents the parametric studies on several cases using 2-D limit equilibrium methods (LE), as well as the 2-D and 3-D FE analyses. The elastic-plastic Mohr-Coulomb failure criterion is employed in the analyses. The comparisons are made between these numerical methods for homogeneous and nonhomogeneous slopes. The strength reduction factor (SFR) obtained from the 2-D analyses is considered to be relatively conservative compared to 3-D FE analysis. However, the discrepancy on the SFR between 2-D and 3-D FE analyses is very limited unless the boundary conditions change on z planes. The boundary conditions assumed in the z planes are important to 3-D finite element analysis, while the effect of length in the z direction can be ignored if the roller-roller type of conditions is applied. The progressive failure can also be observed in the increments of analysis. Moreover, the limitations of LE and 2-D FE analyses are also identified when the complex failure mechanism of a slope is concerned.
No takes yet. Share an insight, caveat, or question.
I-Hsuan Ho (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: