Answers are grounded in this paper and cite their sources.
Investigates coating thickness effects on corrosion in copper targets, highlighting essential design criteria.
This study investigates the corrosion protection mechanism of magnetron-sputtered titanium (Ti) coatings on oxygen-free copper substrates. These substrates are essential components of accelerator-based boron neutron capture therapy targets. The rear side of the copper target substrate, which is exposed to a water cooling circuit, is susceptible to radiolytically induced corrosion driven by hydrogen peroxide (H2O2). To address this issue, Ti coatings of varying thicknesses (0.5, 1.0, and 5.0 μm) were deposited on the backside of the copper target substrate and subjected to immersion tests in a highly aggressive 10% H2O2 solution for up to 28 days. This represents the most severe radiolysis-induced condition relevant to the coolant circuit. Multitechnique characterization using scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy, x-ray diffraction, and laser scanning confocal microscopy revealed a definitive thickness-dependent performance. The 0.5 μm coating failed rapidly due to extensive microcracking, which allowed rapid oxidant penetration. The 1.0 μm coating provided temporary protection but developed localized pitting corrosion. In contrast, the 5.0 μm coating maintained a dense, continuous barrier and supported the formation of a stable, self-healing titanium dioxide (TiO2) passive layer, which effectively isolated the copper substrate. These results establish a critical coating thickness of 5.0 μm as a vital design criterion and offer a robust material solution for enhancing the durability and operational lifetime of high-power accelerator neutron sources.
No takes yet. Share an insight, caveat, or question.
Fuqara et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: