Key points are not available for this paper at this time.
This paper describes a simple and reliable method of improving the surface insulation strength of a spacer used in vacuum. The method is to roughen the spacer surface to an average roughness R/sub a/ higher than 1 or 2 /spl mu/m. The material of the spacer examined is SiO/sub 2/, PMMA, PTFE or Al/sub 2/O/sub 3/ and their shape is a right cylinder with 10 mm in height and 54 mm in diameter. The spacer is subjected to a ramped DC voltage and its surface charging is observed by using an electrostatic probe embedded in the cathode. It has been found that R/sub a/ decisively affects the charging, which decreases as R/sub a/ increases. Increasing R/sub a/ larger than about 2 /spl mu/m suppresses the charging until a higher applied voltage is reached, thus improving the insulation property.
Yamamoto et al. (Fri,) studied this question.