Answers are grounded in this paper and cite their sources.
Evaluates adhesion factors and shaft resistance in weathered siltstone and sandstone, indicating design implications.
The adhesion factor of large-diameter bored piles socketed in for weathered siltstone and sandstone is evaluated and site-specific design correlations are developed. The database comprises 20 instrumented static axial load tests on bored piles with diameters of 1.2-1.5 m and lengths of 9.3-36.0 m. All piles were constructed using the wet-process method and instrumented with strain gauges and extensometers to derive unit shaft resistance and layer displacement. For weak rock layers with measured displacements below 5 mm, hyperbolic fitting was used to estimate shaft resistance at this working displacement. The uniaxial compressive strength of intact rock (σ i ) was adjusted to an equivalent in-situ rock strength (σ c ) using a literature-based weathering reduction factor (α w ) based on the degree of weathering along the socket. For siltstone, 11 layers yielded adhesion factors ranging from 0.08 to 0.42, whereas for sandstone, 6 layers showed adhesion factors of 0.04 to 0.10. These results indicate that siltstone mobilizes adhesion factors roughly twice those of sandstone. Correlations between shaft resistance and both σ i and σ c were evaluated for comparison. The σ c -based correlation reduced bias and scatter relative to σ i -based estimation, giving f s,σc /f s,max ≈ 1.16 with COV = 0.44 (vs. 1.14 with COV = 0.74) for siltstone, and ≈ 1.02 with COV = 0.25 (vs. 1.12 with COV = 0.28) for sandstone. The proposed empirical correlations provide a field-based framework for estimating the shaft resistance of large-diameter bored piles in weak sedimentary rock formations, highlighting the importance of explicitly accounting for rock weathering in pile design.
No takes yet. Share an insight, caveat, or question.
Mahakhotchasenichai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: