Answers are grounded in this paper and cite their sources.
Review evaluates a mix design framework for 3D printing geopolymers, highlighting automation benefits.
Three-dimensional (3D) printing of geopolymers and alkali-activated materials offers a promising pathway toward low-carbon and automated construction. However, its practical application is still limited by the difficulty of designing mixtures that can satisfy several time-dependent requirements at the same time. A printable mixture must be extrudable during pumping and deposition, stiff enough to support subsequent layers, and sufficiently fresh at the interface to maintain interlayer bonding. Existing studies often examine mixture design, rheology, mechanical performance, and process control separately, while consistent definitions and testing approaches remain limited. This review addresses these gaps by introducing the concept of printable geopolymer window, defined as the range of material and process states in which extrudability, buildability, and interlayer bonding are simultaneously satisfied. The printable window is presented as a multidimensional and time-dependent domain governed by four coupled axes, including material chemistry, rheology, process parameters, and time. Within this framework, this study evaluates how precursor systems, alkali activators, compositional ratios, curing regimes, and modifiers position a mixture inside the window; how yield stress, viscosity, thixotropy, and structural build-up evolve with geopolymerization; and how printing-system architecture and operating parameters can shift the mixture into or out of the printable range. Reported quantitative bounds are compiled to their governing constraints, and a practical workflow is proposed for converting a cast geopolymer mixture into a printable one. The review concludes by identifying key research gaps in predictive mix design, chemistry–rheology coupling, test standardization, scale-up, and closed-loop process control.
No takes yet. Share an insight, caveat, or question.
Afshin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: