Answers are grounded in this paper and cite their sources.
Demonstrates improved material properties in concrete from waste materials, suggesting effective resource utilization.
Municipal domestic waste incineration bottom ash (MSWI BA), calcium carbide slag (CS), and desulfurization gypsum (FGD) are accumulated in substantial quantities and present serious environmental pollution issues. Consequently, there is an urgent requirement to develop economically viable resource utilization technologies. The utilization of MSWI BA, CS, and FGD in the production of nonautoclaved aerated concrete (non-AAC) offers a promising approach to promote the effective use of solid waste resources. The mix proportions of MSWI BA, CS, and FGD were optimized employing the ternary profile design method, and the influence of variations in these mix ratios on four physical property indices, namely, expansion height, compressive strength, dry density, and porosity, of non-AAC was examined. Characterization techniques such as X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) testing were utilized to analyze the hydration products and microstructure of the test specimens. Results indicated that the contours of compressive strength and dry density within the MSWI BA-FGD-CS ternary system exhibited similar trends, with a maximum compressive strength of 2.2.8 MPa observed at 28 days and a minimum dry density of 600 kg/m3. An increase in the content of MSWI BA and CS resulted in a decrease in compressive strength and dry density of the samples. NMR and SEM analyses demonstrated that higher proportions of bottom ash contributed to an increased presence of large, interconnected pores, leading to uneven pore distribution and deterioration of the overall pore structure. In the experimental design, the FGD content was held constant at 0%, while MSWI BA content decreased from 90% to 60%. This adjustment led to a reduction in porosity by 23.49%. Conversely, with the FGD content increased from 0% to 30% while fixing CS at 10%, the porosity decreased by 37.97%. Based on a comprehensive assessment of strength and dry density indices, the optimal mix ratio is determined as follows: MSWI BA content ranging from 60% to 85%; FGD content between 10% and 15%; and CS content between 25% and 30%.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: