Laminar flame speeds of dimethyl ether-propane/butane/propylene air mixtures

Introduction Dimethyl ether (DME) has potential to be used both blended with or as an alternative to Liquefied Petroleum Gas (LPG) to reduce the carbon emissions of a fuel used globally for cooking and heating. Standards to enable the adoption of this require flame speed measurements of the blends of these fuels. Methods Measurements of counterflow premixed flame speeds for blends of DME, propane, butane, and propylene at fuel-air equivalence ratios (φ) from 0.75 to 1.6 have been made. These measurements were taken to fill a gap in the current published datasets that primarily have focussed on pure fuels and blends of LPGs constituent gases. These measurements have been produced through a mixture of empirical and simulation work. Results We found the flame speeds of the blends overall increase from 0.25 m/s at φ = 0.75 to between 0.4 m/s and 0.45 m/s at φ = 1.0 peaking around φ = 1.0 to 1.1 before decreasing as φ increases further. Discussion These data will be useful to support the production of industrial standards that allow for greater adoption of renewable DME as an alternative low carbon fuel to fossil LPG.