Answers are grounded in this paper and cite their sources.
Exploratory framework identifies thermal discomfort patterns in high-altitude residential buildings, indicating design improvements.
High-altitude Andean climates present dual thermal pressure: daytime overheating risk coexists with nighttime heat loss within the same annual cycle. Aggregate energy indicators do not reveal the direction of thermal discomfort, limiting their utility for early-stage passive design. This study proposes a two-stage exploratory diagnostic framework for residential buildings in this context. Stage 1 uses window-to-wall ratio (WWR) and average opaque wall thermal transmittance (U-wall) to construct a preliminary thermal-risk alert matrix that is applicable at the schematic design phase. Stage 2 uses the post-simulation Discomfort Ratio (DR = Href/Hcal) to confirm the direction of thermal discomfort as overheating-dominant, heat-loss-dominant, or mixed. The framework was applied to 14 anonymized residential building energy simulation cases in Loja, Ecuador. Of 13 classifiable cases, DR assigned 5 to overheating-dominant, 5 to heat-loss-dominant, and 3 to mixed patterns; 6 cases with complete WWR and U-wall data populated the Stage 1 matrix. The surface-to-volume ratio and air changes per hour did not clearly discriminate across patterns. The framework is exploratory and corpus-specific; the alert matrix does not replace dynamic simulation and requires validation before normative or predictive application. Alongside DR, a bounded directional-intensity index (Normalized Discomfort Balance) and the total discomfort load are reported so that the direction and the magnitude of discomfort can be read jointly.
No takes yet. Share an insight, caveat, or question.
Correa-Jaramillo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: