Answers are grounded in this paper and cite their sources.
Experimental evaluation shows ZrO2 drills maintain lower temperatures in bone drilling, suggesting reduced risk of osteonecrosis.
Overheating of the bone during drilling may raise intraosseous temperature to more than 47°C, leading to osteonecrosis and compromising implant stability. Tool material, geometry and operating conditions play an important role in heat generation. Stainless steel (SS316L) is commonly used, but ZrO 2 has become a possible alternative due to its biocompatibility and lower thermal impact. Custom drill bits (2.5, 3.0 and 3.5 mm diameter; two flutes; 90° point angle; 25° helix angle) were manufactured. A five-axis CNC machine was used to perform drilling experiments on standardized polyurethane bone blocks. A feed rate of 30 mm/min and spindle speeds of 900, 1100 and 1300 r/min were used. Temperatures T max and T avg were measured using thermocouples and recorded in two trials per condition. For T max and T avg , the temperature values obtained in two repeated trials were reported as mean ± standard deviation. SS316L drills produced greater, more fluctuating thermal profiles, reaching a T max of ∼37°C at 900 r/min (2.5 mm) to 58.75°C at 1300 r/min (3.0 mm), exceeding the osteonecrosis threshold. The T avg reached up to 39°C at 1300 r/min. On the contrary, ZrO 2 drills generated lower temperatures with a T max of 31–46°C and a T avg of 29–35°C irrespective of the diameter and speed. It is worth noting that ZrO 2 drills did not surpass 47°C. Thermal response is highly dependent on drill diameter and spindle speed, but material properties are the decisive factor. ZrO 2 drills operated at lower T max and T avg than SS316L and exhibited greater thermal control, minimizing the risk of thermal osteonecrosis. Results suggest that ZrO 2 may provide a safer thermal response during the test dry-bone drilling process.
No takes yet. Share an insight, caveat, or question.
Addepalli et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: