Answers are grounded in this paper and cite their sources.
Exploratory study examines performance of glass-glass photovoltaic modules indicating minimal degradation after prolonged indoor storage.
Glass-Glass (GG) photovoltaic (PV) modules are increasingly adopted in the solar industry. However, little attention has been given to the condition of modules stored indoors for extended periods before deployment. This exploratory study examined the performance of GG modules after 9 years of indoor storage using accelerated stress tests based on IEC 61,215. These tests included thermal cycling (TC600), damp heat (DH3000), humidity freeze (HF30), and potential-induced degradation (PID288h under ±1500 V). Electrical performance and electroluminescence (EL) imaging were conducted both before and after testing. The single-sample results showed limited degradation, with power losses of 1.3% under DH3000, ~1% under PID288h, 1.9% under TC600, and 2.4% under HF30, all within the acceptance thresholds of IEC. In particular, the observed losses in maximum power (Pmax) and short-circuit current (Isc) remained moderate, suggesting that the degradation behavior was more likely associated with optical, surface-related, and/or interface-related evolution rather than catastrophic electrical failure. These findings demonstrate that GG modules undergo minimal degradation during extended indoor storage. Nevertheless, small sample volume and a lack of field-aged reference samples render the conclusions less universally applicable. Subsequent large-sample systematic experiments are recommended to clarify the long-term storage impacts on PV module accelerated aging performance.
No takes yet. Share an insight, caveat, or question.
Meng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: