Answers are grounded in this paper and cite their sources.
Recently, the advent of optical systems has made possible the fast and accurate measurement of roughness discontinuity in three dimensions. In this study, a number of 3D roughness parameters such as fractal parameter (D), amplitude parameter (A), roughness parameter Rs and Grasselli’s roughness parameter (2A0θ*max/(C + 1)) have been presented to quantify the geometry of the fracture surfaces. However, all these roughness parameters are scale dependent and their values change with scale. In this paper, the variations in theses parameters have been investigated with regard to scale. For this purpose, initially, three natural fracture surfaces with the dimensions 500 × 500 mm2 were selected and then, the four mentioned roughness parameters were calculated for these three surfaces in the range from 50 × 50 mm2 to 500 × 500 mm2. Finally, to evaluate the accuracy of roughness estimation by these roughness parameters, several joint replicas from the surfaces were constructed and the direct shear tests were carried out on them. Based on the experimental results, the Grasselli’s roughness parameter gives more accurate estimation of the variations in surface roughness in regard to scale. Also the effect of small-scale evenness on surface roughness has been investigated.
No takes yet. Share an insight, caveat, or question.
Azinfar et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: