Answers are grounded in this paper and cite their sources.
Examines bonding stability and mechanical reliability of Ag joints in thermal aging at high temperatures, indicating significant improvements.
This study investigates the high-temperature stability of epoxy molding compound (EMC) molded Ag joint structures during thermal aging. Ag plated Cu TO-247 substrates were used to evaluate interfacial bonding stability of Ag sinter joints. After the post molding cure (PMC) process, densification was achieved by reducing porosity and bond line thickness (BLT) while enhancing interconnection. During thermal aging at 250 °C, sinter neck growth and connected length increased and stabilized after 500 h. The bonding strength remained stable after PMC treatment, following similar change with porosity and BLT, while failure energy increased linearly to 160 mJ at 1000 h. Fracture analysis revealed a transition from interfacial to cohesive failure within the sintered joint after thermal aging, accompanied by elongated fracture traces, indicating enhanced plastic deformation. In this study, we thoroughly investigated the effects of the PMC process on bonding stability and mechanical reliability during thermal aging at 250 °C when bonding commercial Ag nano-porous sheets directly onto Ag plated Cu TO-247 substrate, from the perspective of microstructural development.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: