Answers are grounded in this paper and cite their sources.
Demonstrates enhanced mechanical properties in polydicyclopentadiene materials, suggesting better performance in demanding applications.
Polydicyclopentadiene (PDCPD), obtained through the ring‐opening metathesis polymerization (ROMP) of Dicyclopentadiene (DCPD), benefits from a highly cross‐linked rigid framework that provides superior impact resistance; however, it struggles to meet the increasingly demanding mechanical performance requirements of certain emerging fields. To enhance the performance of PDCPD materials, this study prepared poly (DCPD/TCPD) and poly (DCPD/α‐pinene) copolymers via ROMP, incorporating tricyclopentadiene (TCPD) as a secondary monomer and using α‐pinene for comparison. The introduction of these secondary monomers effectively increased the rigidity of PDCPD. Specifically, with the addition of 5% α‐pinene, the tensile strength of PDCPD increased from 52.1 to 58.9 MPa; similarly, the addition of 10% TCPD raised the tensile strength to 61.3 MPa. To achieve a synergistic optimization of stiffness and toughness, cyclooctene (COE) was further introduced as a third monomer. The resulting ternary copolymers exhibited superior rigidity and toughness compared to pure PDCPD. When the DCPD/TCPD/COE ratio was 80/10/10, the poly (DCPD/TCPD/COE) composite achieved a tensile strength of 55.1 MPa, a flexural strength of 91.3 MPa, an elongation at break of 66.3%, and an impact strength of 6.8 kJ/m 2 .
No takes yet. Share an insight, caveat, or question.
Huan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: