Answers are grounded in this paper and cite their sources.
Reveals effective in situ laser annealing of Pb(Zr0.52Ti0.48)O3 thin films, suggesting enhanced material properties.
A pulsed laser deposition system with in situ laser annealing was utilized to grow Pb(Zr0.52Ti0.48)O3 thin films on a laser crystallized Pb(Zr0.20Ti0.80)O3 seed layer, at a temperature of ∼370 °C. Polycrystalline 1.1 μm thick films exhibited columnar grains with small grain sizes (∼30 nm). The films showed well-saturated hysteresis loops (with ∼25 μC/cm2 remanent polarization, ∼50 kV/cm coercive field) and exhibited loss tangents <2.5% with a permittivity of ∼730. Film orientation could be controlled via the substrate choice; {111} Pb(Zr0.52Ti0.48)O3 films were grown on oriented (111) Pb(Zr0.30Ti0.70)O3 sol-gel seed layers, while {001} films were prepared on (100) SrTiO3 single crystals.
No takes yet. Share an insight, caveat, or question.
Rajashekhar et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: