Answers are grounded in this paper and cite their sources.
Investigates electrical properties of lead zirconate titanate thin films, indicating improved microstructure control.
Highly oriented Pb(Zr x Ti 1- x )O 3 (PZT) thin films were in situ grown on Pt/Ti/SiO 2 /Si substrates by a hybrid process combining the sol-gel method and pulsed-laser deposition (PLD). Crystalline phases and preferred orientation of the PZT films were investigated by X-ray diffraction analysis. Surface morphology and microstructure were observed by scanning electron microscopy and transmission electron microscopy, respectively. Electrical properties of the films were evaluated by measuring their P - E hysteresis loops and dielectric constants. The preferred orientation of the films deposited by hybrid processing can be controlled using the layer deposited by the sol-gel method. The deposition temperature required to obtain the perovskite phase in hybrid processing is 460°C, and is significantly lower than that in the case of direct film deposition by PLD on a Pt/Ti/SiO 2 /Si substrate. The dielectric constant and remanent polarization of the films in situ deposited at 460°C were approximately 900 and 15 µC/cm 2 , respectively.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: