Answers are grounded in this paper and cite their sources.
Dissimilar metal beam-column welds used in earthquake-resistant steel frames often fail prematurely because welding parameters simultaneously govern thermal severity, microstructure gradients, and residual-stress hotspots at constrained root regions. Here, an Integrated Computational Materials Engineering (ICME) digital thread is developed for hybrid laser-arc welding (HLAW) of a dissimilar beam-column joint, linking process inputs to lifecycle performance through validated thermo-mechanical simulation and targeted experiments. A moving hybrid heat-source finite-element model predicts peak temperature and cooling severity t 8 / 5 and resolves longitudinal residual-stress localization, and is calibrated against thermocouple histories and fusion-profile macrographs. These thermal outputs drive microstructure/interface assessment across the two fusion boundaries I 1 and I 2 , including coarse-grained HAZ evolution and a graded diffusion/reaction layer at the dissimilar interface, supported by EBSD/EDS and hardness mapping. Property heterogeneity is condensed into damage-driver indices based on HAZ softening Δ H V soft and hardness-gradient severity G HV , enabling mechanistic linkage to crack initiation at the root-critical zone CZ 2 under cyclic (seismic-type) loading. Model-guided parameter optimization reduces the dominant damage drivers at CZ 2 and shifts cyclic damage away from the root, increasing low-cycle fatigue life from ∼ 4 × 10 4 to ∼ 1 × 10 5 cycles ≈ 2.5 × . Finally, probabilistic propagation of process variability defines a robust operating window that meets a target life with high reliability, providing a process-efficient pathway to qualify high-performance dissimilar joints with reduced experimental trials supported by targeted validation of baseline, optimized conditions and improved lifecycle margins for seismic applications.
No takes yet. Share an insight, caveat, or question.
Zhen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: