Answers are grounded in this paper and cite their sources.
Lead telluride mesa diodes were fabricated from a series of p-n junctions grown on (111) BaF2 substrates, in which the hole concentration p was kept constant at 1017cm−3 and the electron concentration n varied between 1017 and 1019cm−3. Capacitance-voltage analysis showed that for n>1018cm−3 the PbTe p-n junction is one sided and abrupt. The parameters (incremental resistance, series and parallel resistances, and ideality factor) obtained from the current-voltage (I-V) characteristics and the detectivity D* exhibited a large fluctuation among the photodiodes. In spite of these fluctuations, it was possible to correlate the noise and D* values to the parameters obtained from the I-V analysis. These results allow predicting the PbTe detector’s figures of merit from the data obtained from the I-V curves. The best PbTe photodiodes fabricated here showed D* values close to 1011cmHz1∕2W−1, comparable to InSb and HgCdTe commercial detectors and to PbTe sensors fabricated on Si substrates.
No takes yet. Share an insight, caveat, or question.
Barros et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: