Answers are grounded in this paper and cite their sources.
Piezoelectric nanogenerators (PNGs) based on ZnO nanowires embedded in a polymer matrix have shown great promise in converting ambient mechanical energy into electrical energy, positioning them as candidates for autonomous sensor applications. Here, we fabricate vertically integrated ZnO NW/parylene-C composite-based PNGs using a capacitive configuration. By carefully controlling the thickness of the parylene-C top layer over ZnO nanowire arrays, four PNGs with parylene-C top layer thicknesses ranging from 1.1 to 3.2 µm were successfully fabricated. Raman spectroscopy suggests that the parylene-C does not affect the crystallographic properties of ZnO nanowires when coated. In addition, internal impedance measurements reveal that increasing the parylene-C top layer thickness decreases the PNG capacitance, resulting in higher electrical impedance. The performance of these PNGs is assessed through piezoelectric characterizations across a range of load resistances, from 50 kΩ to 122 MΩ, under vertical compression forces of 1 N applied at 0.2 Hz. These tests have identified an optimal parylene-C top layer thickness of around 2 µm, resulting in an instantaneous power density of 1.8 µW/cm 3 generated by the PNG. These findings highlight promising pathways for enhancing the efficiency and performance of PNGs.
No takes yet. Share an insight, caveat, or question.
Manrique et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: