Key points are not available for this paper at this time.
ABSTRACT Pre‐stress bonded composite patch is a promising technique to reinforce steel member damaged by fatigue. The effectiveness of this technique was verified by fatigue tests on notched steel plates. Results showed that the application of carbon fibre reinforced plastic (CFRP) strips and, eventually, the introduction of a compressive stress by pretension of the CFRP strips prior to bonding produced a significant increment of the remaining fatigue life. In this paper, the stress intensity factor in the notched plates is computed by a two‐dimensional finite element model in connection with the three‐layer technique in order to reduce the computational effort. Due to high stress concentration at the plate crack tip, debond is assumed at the adhesive–plate interface. The goal is to illustrate the influence of some reinforcement parameters such as the composite strip stiffness, the pre‐stress level, the adhesive layer thickness and the size of the debonded region on the effectiveness of the composite patch reinforcement.
Colombi et al. (Tue,) studied this question.