Answers are grounded in this paper and cite their sources.
Proton exchange membrane (PEM) fuel cells are an emerging clean energy technology, offering high efficiency with reduced environmental impact. Maintaining, membrane hydration without flooding is one of the key challenges for stable operation. This study experimentally investigates PEMFC performance, operating without external humidifier support, by employing zirconium oxide (ZrO2) as an innovative layer on the anode electrode (Pt/C/ZrO2). Zirconium oxide was synthesized via thermal decomposition of the zirconium oxychloride octahydrate and the catalyst ink was prepared by combining the synthesized zirconia with isopropyl alcohol and a Nafion solution. Numerous characterization techniques such as XRD, Raman spectrometry, UV spectrometry and electrochemical studies employing the cyclic voltammetry (CV), electrochemical impedance spectrometry (EIS) and galvanostatic charge discharge (GCD) were conducted to analyze the characteristics of the zirconia coated catalyst layer. A single cell with ZrO2-coated anode achieved peak power densities of 0.56 W/cm2 (humidified) and 0.53 W/cm2 (dry), corresponding to a 1.7-fold enhancement compared to the commercial MEA (0.33 W/cm2). The output power reveals that the zirconia coated catalyst did not have an adverse effect on the hydrogen oxidation reaction (HOR) under dry and humidified gas conditions which suggests the reliability of the novel zirconia coated catalyst.
No takes yet. Share an insight, caveat, or question.
Kanakamani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: