A numerical modelling of an electric arc and its interaction with the anode: Part I. The two-dimensional model

A two-dimensional numerical model of the interaction between an electric arc and a solid anode of different types is presented in this study. The CFD commercial code FLUENT is used to model the plasma flow and the solid anode domain. Quantities such as the velocities or the temperature are presented, and the energy transfer components between the plasma and the anode are quantified. Comparisons of the calculated results with the available experimental data in the literature show that the model predictions are in good agreement. In the case of argon gas and a copper anode, with the distance between the two electrodes 10 mm, the maximum temperature near the cathode tip is 21 000 K for a current of I = 200 A. For the same configuration, the maximum of the current density in the copper electrode is found to be −2.5 × 106 A m−2. The electrical flux is the main component of the transferred flux on the anode. Once validated, our model is applied to other theoretical and experimental configurations and allows us to study several parameters when attention is focused on the influence of metal vapour from the vaporization of the anode or the current-carrying path in the electrode on the arc behaviour. According to the current-carrying path in the anode, the current density distribution is affected in the material and its surface.