Answers are grounded in this paper and cite their sources.
Investigates mechanical properties and microstructure in GMAW AISI 1010 steel, highlighting critical factors for weld integrity.
This study systematically investigates the microstructural evolution and mechanical behavior of Gas Metal Arc Welded (GMAW) AISI 1010 low-carbon steel using an integrated, multi-technique characterization approach. Optical microscopy and image analysis quantified grain refinement across weld zones, hardness mapping established a Hall–Petch relationship between microstructure and strength, while tensile, bend, and Charpy impact testing correlated mechanical performance with local metallurgical features. Scanning Electron Microscopy (SEM) provided fractographic validation of failure mechanisms. The complementary use of these methods enabled a comprehensive correlation between processing parameters, microstructure, and resulting mechanical properties. Quantitatively, the weld zone (WZ) exhibited the finest average grain size (0.58 µm²) and the highest hardness (65.7 HRB), whereas the base metal (BM) and heat-affected zone (HAZ) showed coarser grains (1.39 µm² and 0.78 µm², respectively) with slightly lower hardness values (≈65 HRB). Despite the WZ’s higher hardness, tensile and bend tests revealed that fracture initiated at the weld centerline, confirming it as the weakest region under applied stress. Charpy impact tests demonstrated a 48% reduction in absorbed energy under cryogenic conditions, indicating brittle transition behavior. SEM fractography revealed mixed ductile–brittle features—dimples, cleavage facets, and intergranular tearing—attributed to thermal gradients and localized residual stresses. The calculated carbon equivalent (CE = 0.371) confirmed good inherent weldability, but additional factors such as residual stress, joint geometry, and rapid post-weld cooling were recognized as critical influences on overall joint integrity. Collectively, these results highlight how microstructural heterogeneity governs strength and toughness in mild-steel GMAW joints. The integrated approach demonstrates that combining quantitative microscopy, mechanical testing, and fractographic analysis provides a more reliable assessment of weld quality and performance in low-carbon steels for structural applications.
No takes yet. Share an insight, caveat, or question.
M L Rahman (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: