Answers are grounded in this paper and cite their sources.
Biomaterials offer a promising alternative to nonrenewable engineering materials, and industrial hemp has garnered increasing interest due to its eco-friendly cultivation, short growth cycle, phytoremediation capabilities, and diverse industrial applications. While prior research has explored the use of hemp fiber and hurd in additive manufacturing, the use of low-cost hemp straw remains largely unexamined. In parallel, the brittleness of polylactic acid (PLA) limits its broader application in additive manufacturing, motivating the exploration of strategies to improve its ductility. This study investigates whether incorporating hemp straw powder into PLA can improve deformation capacity while reducing the environmental impacts of parts produced via fused filament fabrication. Hemp straw-PLA composite filaments and pure PLA filaments were extruded and used to produce tensile test specimens. Environmental impacts were evaluated using a gate-to-gate process-based life cycle assessment conducted in accordance with ISO 14,040:2006. Modeling was performed in SimaPro using the ecoinvent database, with impact assessment carried out using ReCiPe 2016, Cumulative Energy Demand, and IPCC 2021 methodologies. Sensitivity analyses examined transportation distances, impact assessment methods, specimen thickness, alternative proxies for filler material, and electricity mix scenarios. Results from ReCiPe 2016 indicate that the environmental impact of a pure PLA tensile test specimen (6.83 mPt) is approximately four times higher than that of a hemp straw-PLA specimen (1.63 mPt), with similar trends observed across other impact methods. These differences are primarily attributable to variations in material use, energy consumption, and emissions during filament production and fused filament fabrication. Exploratory tensile testing indicated that increasing specimen thickness can moderately increase elongation at break for pure PLA, although the improvement remained substantially lower than that observed for hemp straw-PLA composites. Overall, the study demonstrates that incorporating hemp straw filler into PLA can improve deformation capacity while reducing environmental impacts under the conditions examined.
No takes yet. Share an insight, caveat, or question.
Enarevba et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: