Answers are grounded in this paper and cite their sources.
Fused deposition modeling (FDM) of short carbon fiber reinforced polylactic acid (PLA-CF) composites shows strong potential for lightweight structural applications, yet mechanical performance is highly dependent on processing conditions and involves trade offs among multiple properties. This study presents a systematic multi response optimization of FDM parameters using a hybrid Taguchi-GRA approach with principal component analysis based weighting. Tensile strength, Charpy impact energy toughness, and hardness (HD) were jointly evaluated to represent structural and functional requirements. Five key parameters-nozzle temperature, layer height, printing speed, infill density, and nozzle diameter were investigated through a mixed level Taguchi L16 design, while signal to noise ratio analysis and analysis of variance were applied to assess parameter significance. The results showed tensile strength was mainly controlled by layer height and infill density, Charpy impact energy by nozzle temperature, printing speed, and infill density, and HD by nozzle diameter and layer height. Multi response optimization identified an optimal setting of 230 °C nozzle temperature, 0.15 mm layer height, 120 mm s −1 printing speed, 100% infill density, and 0.4 mm nozzle diameter. Confirmation experiments verified simultaneous improvements of 15.31% in tensile strength, 6.20% in Charpy impact energy, and 2.18% in HD. The proposed Taguchi-GRA-PCA framework provides an efficient strategy and practical guidelines for optimizing FDM processing of PLA-CF composites.
No takes yet. Share an insight, caveat, or question.
Hoang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: