Answers are grounded in this paper and cite their sources.
Demonstrates improved conductivity in solar cells through hot corona discharge, highlighting efficiency benefits.
Silicon solar cell manufacturing is dominated by cell architectures that rely on a high-temperature energy-intensive diffusion process to introduce dopants. Such doped layers lead to substantial Auger recombination losses. Charged oxide inversion layer (COIL) solar cells eliminate the need for high-temperature diffusion and highly doped surface layers by incorporating charge in a surface dielectric to form an inversion layer emitter beneath the semiconductor-dielectric interface. The success of the COIL design hinges on achieving a sufficiently high dielectric charge to produce highly conductive inversion-layer emitters. In this work, we develop a new “hot-corona discharge” technique to facilitate the charge drive-in via a process integrating corona charging and thermal annealing into a single step. We show the process is effective in creating an n- type inversion layer on p -type silicon wafers, yielding increases in carrier lifetime and reductions in emitter sheet resistance. The temperature (330–430 ° C) and time (30–1020 s) dependence of this new hot-corona approach is studied, demonstrating careful control over charge density. By optimising the process against temperature and ion drive-in cycles, we achieve the highest positive charge concentration reported on a SiO 2 /Si interface of >4.0 × 10 13 q/cm 2 . With the ability to incorporate such high charge density, a low sheet resistance and highly conductive inversion layer can be formed. This represents a significant step forward in the attempt to replace the diffused emitter technology with a low-temperature alternative, enabling high-efficiency inversion-layer solar cells with reduced thermal budget and intrinsic losses. • A “hot-corona” method was developed to incorporate charge into SiO 2 layer to form an inversion layer. • The highest positive charge concentration at SiO 2 /Si interface of >4.0 × 10 13 q/cm 2 was reported. • The temperature and time dependence of the hot-corona approach was demonstrated. • A simulated solar cell efficiency exceeding 24 % was achieved based on COIL method.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: