Answers are grounded in this paper and cite their sources.
Polymeric carbon precursors typically yield poorly ordered sp² hybridized carbon after pyrolysis at 1000°C. This poor ordering results in a turbostratic carbon that lacks the thermomechanical properties of the carbon produced from more graphitizable precursors such as pitch. To overcome this limitation, we explored how incorporating metallocene additives from group 5 to group 10 (i.e., vanadocene, chromocene, manganocene, ferrocene, cobaltocene, nickelocene, and ruthenocene) influences the carbon crystallite thickness ( L C ) and thermal decomposition pathways of a non-graphitizable polybenzoxazine. The incorporation of these additives led to changes in the crystallinity of pyrolyzed carbon as well as the thermal decomposition behavior. Powder X-ray diffraction saw L C values ranging from 1.65 nm (ruthenocene) to 7.5 nm (nickelocene), with the higher L C values approaching graphitizable precursors (∼5 nm at 1000°C) from metallocenes of groups 7-10. X-ray photoelectron spectroscopy was used to identify the chemical state of the metals post pyrolysis and provided an experimental check for the X-ray diffraction analysis. Additionally, low- and high-resolution TEM was used to investigate the carbon morphology, which provided visual context for the diffraction analysis. Thermogravimetric analysis of the decomposition of the polymer provided insight into the effects of metallocene additives during pyrolysis. Increases in mass yield were attributed to metallocene-catalyzed radical capture. Our results highlight the potential use of metallocene additives for controlling the crystallinity of carbon during pyrolysis.
No takes yet. Share an insight, caveat, or question.
Muhammed et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: