Answers are grounded in this paper and cite their sources.
The CO poisoning effect on carbon-supported platinum catalysts at a loading of 0.5 mg Pt/cm 2 per electrode in polymer electrolyte membrane fuel cells PEMFCs has been investigated in a temperature range from 125 to 200C with the phosphoric acid-doped polybenzimidazole membranes as electrolyte. The effect is very temperature-dependent and can be sufficiently suppressed at elevated temperature. By defining the CO tolerance as a voltage loss less than 10 mV, it is evaluated that 3% CO in hydrogen can be tolerated at current densities up to 0.8 A/cm 2 at 200C, while at 125C 0.1% CO in hydrogen can be tolerated at current densities lower than 0.3 A/cm 2 . For comparison, the tolerance is only 0.0025% CO 25 ppm at 80C at current densities up to 0.2 A/cm 2 . The relative anode activity for hydrogen oxidation was calculated as a function of the CO concentration and temperature. The effect of CO 2 in hydrogen was also studied. At 175C, 25% CO 2 in the fuel stream showed only the dilution effect.
No takes yet. Share an insight, caveat, or question.
Li et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: