Key result
Adding the pulsatility index to Reynolds and Womersley numbers significantly improved the prediction of the oscillating shear index, increasing the R-square value from 0.50 to 0.95.
Why the study?
Does the addition of the pulsatility index (PI) to heart rate and average flow rate improve the prediction of reciprocating wall shear stress parameters in pulsating flow waveforms?
Does the addition of the pulsatility index (PI) to heart rate and average flow rate improve the prediction of reciprocating wall shear stress parameters in pulsating flow waveforms?
Adding the pulsatility index to standard heart rate and flow rate measurements improves the prediction of arterial wall shear stress parameters, which are important for assessing atherosclerosis risk.
Answers are grounded in this paper and cite their sources.
HR and Q metrics may inadequately predict reciprocating WSS; leaves open waveform-specific modeling for atherosclerosis risk assessment.
Arterial wall shear stress (WSS) parameters are widely used for prediction of the initiation and development of atherosclerosis and arterial pathologies. Traditional clinical evaluation of arterial condition relies on correlations of WSS parameters with average flow rate (Q) and heart rate (HR) measurements. We show that for pulsating flow waveforms in a straight tube with flow reversals that lead to significant reciprocating WSS, the measurements of HR and Q are not sufficient for prediction of WSS parameters. Therefore, we suggest adding a third quantity-known as the pulsatility index (PI)-which is defined as the peak-to-peak flow rate amplitude normalized by Q. We examine several pulsating flow waveforms with and without flow reversals using a simulation of a Womersley model in a straight rigid tube and validate the simulations through experimental study using particle image velocimetry (PIV). The results indicate that clinically relevant WSS parameters such as the percentage of negative WSS (P[%]), oscillating shear index (OSI) and the ratio of minimum to maximum shear stress rates (min/max), are better predicted when the PI is used in conjunction with HR and Q. Therefore, we propose to use PI as an additional and essential diagnostic quantity for improved predictability of the reciprocating WSS.
No takes yet. Share an insight, caveat, or question.
Avrahami et al. (2016) studied Arterial wall shear stress (n=14). Pulsatility Index (PI) vs. Heart rate and flow rate alone was evaluated on Prediction accuracy (R-square) of Wall Shear Stress parameters (OSI, P[%], min/max). Adding the pulsatility index to Reynolds and Womersley numbers significantly improved the prediction of the oscillating shear index, increasing the R-square value from 0.50 to 0.95.
Synapse has enriched 10 related papers. Consider them for comparative context: