Key result
Increasing the maximum flow rate during pulsatile flow at a constant mean flow rate of 3 L/min augmented the mean wall shear stress from 13.1 to 32.9 dyne/cm2.
Why the study?
Does pulsatile flow increase wall shear stress compared to nonpulsatile flow in an in vitro tube model?
Does pulsatile flow increase wall shear stress compared to nonpulsatile flow in an in vitro tube model?
In an in vitro model, the maximum flow rate during pulsatile flow is the dominant factor augmenting wall shear stress, which may influence endothelial function in VADs.
Answers are grounded in this paper and cite their sources.
Augmenting peak flow rate elevates wall shear stress in vitro; hypothesis-generating for endothelial effects in VADs.
Wall shear stress (WSS) has been considered to play an important role in the physiological and metabolic functions of the vascular endothelial cells. We investigated the effects of the pulse rate and the maximum flow rate on the WSS to clarify the influence of pulsatility. Water was perfused in a 1/2 inch transparent straight cylinder with a nonpulsatile centrifugal pump and a pulsatile pneumatic ventricular assist device (VAD). In nonpulsatile flow (NF), the flow rate was changed 1 to 6 L/min by 1 L/min increments to obtain standard values of WSS at each flow rate. In pulsatile flow (PF), the pulse rate was controlled at 40, 60, and 80 bpm, and the maximum flow rate was varied from 3.3 to 12.0 L/min while the mean flow rate was kept at 3 L/min. The WSS was estimated from the velocity profile at measuring points using the laser illuminated fluorescence method. In NF, the WSS was 12.0 dyne/cm2 at 3 L/min and 33.0 dyne/cm2 at 6 L/min. In PF, the pulse rate change with the same mean, and the maximum flow rate did not affect WSS. On the other hand, the increase in the maximum flow rate at the constant mean flow rate of 3 L/min augmented the mean WSS from 13.1 to 32.9 dyne/cm2. We concluded that the maximum flow rate exerted a substantial augmentative effect on WSS, and the maximum flow rate was a dominant factor of pulsatility in this effect.
No takes yet. Share an insight, caveat, or question.
Nakata et al. (1999) studied this question. Pulsatile flow vs. Nonpulsatile flow was evaluated on Wall shear stress (WSS). Increasing the maximum flow rate during pulsatile flow at a constant mean flow rate of 3 L/min augmented the mean wall shear stress from 13.1 to 32.9 dyne/cm2.
Synapse has enriched 10 related papers. Consider them for comparative context: