Answers are grounded in this paper and cite their sources.
Experimental investigation shows enhanced energy absorption and stability in polymer tubes with lattice cores, suggesting applications in crashworthiness.
This study investigates the axial crushing behavior and energy absorption performance of bio-inspired continuous thin-walled polymer tubes reinforced with integrated lattice cores. The continuous tube-lattice structures (CTLs) were fabricated as a single component using fused deposition modeling (FDM), which reduces interfacial defects and improves load transfer during deformation. Tubes made from polylactic acid (PLA Plus) and acrylonitrile butadiene styrene (ABS) were tested under quasi-static axial compression. A finite element model developed in LS-DYNA was validated against experiments, showing good agreement in deformation modes and force-displacement responses. A parametric study examined the effects of wall thickness, triggering features, cross-sectional geometry, and lattice topology on the crushing response. Increasing wall thickness improved the specific energy absorption (SEA), while the crushing force efficiency (CFE) changed only slightly beyond 1 mm. The hexagonal cross-section shows improved crushing stability and efficiency compared with circular and square cross-sections. The integrated lattice core promotes progressive deformation by restricting local buckling and enabling three‑dimensional load transfer. PLA Plus demonstrates higher SEA due to its greater stiffness, whereas ABS shows improved CFE as a result of its higher ductility. Among the investigated lattice topologies, the Z‑reinforced face‑centered cubic lattice (FCCZ) provides the most balanced performance in terms of SEA and crushing stability. These results highlight the potential of polymeric CTLs as lightweight and tunable energy absorbers for crashworthiness applications.
No takes yet. Share an insight, caveat, or question.
Dehkordi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: