The effects of nano-silica/nano-alumina on fatigue behavior of glass fiber-reinforced epoxy composites

This paper presents an experimental and statistical study of the fatigue behavior of unidirectional glass fiber-reinforced epoxy composite rods manufactured using pultrusion technique and modified with nanoparticles of alumina (Al 2 O 3 ) and silica (SiO 2 ) at four different weight fractions (0.5, 1.0, 2.0 and 3.0 wt.%). Tensile test was performed to investigate the influence of nanoparticles. Addition of alumina nanoparticles up to 3 wt.% increases the tensile strength by 54.76% over the pure glass fiber-reinforced epoxy specimen. For silica nanoparticles, there is an increase in the tensile strength of 31.29% for the content of 0.5 wt.% over the pure glass fiber-reinforced epoxy specimen. As the silica nanoparticles’ content increases over 0.5 wt.%, there is a decrease in the tensile strength. Rotating bending fatigue tests have been conducted at five different stress levels. Fatigue life of glass fiber-reinforced epoxy composite rods modified with alumina nanoparticles increases as the content of the nanoparticles increases. The effect of adding silica nanoparticles on the fatigue life of glass fiber-reinforced epoxy composite rods is relatively insignificant with a small improvement in the content of 0.5 wt.% silica above the pure glass fiber-reinforced epoxy specimens. Two-parameter Weibull distribution function was used to statistically analyze the fatigue life data.