Answers are grounded in this paper and cite their sources.
Evaluates tensile performance in epoxy composites, suggesting optimal nano-alumina loading.
Epoxy resins suffer from inherent brittleness, limiting their reliability in impact-resistant structures. This study addresses the dispersion–performance trade-off in nano-alumina (Al2O3)/epoxy composites by fabricating specimens with 0–15 wt% filler loadings using an optimized ultrasonic-mechanical dispersion strategy. Quasi-static and dynamic tensile behaviors (600–1600 s−1) were evaluated using a universal tester and a split Hopkinson tensile bar (SHTB) system equipped with high-sensitivity semiconductor strain gauges. Results identify a critical agglomeration threshold at 3 wt%. The 1 wt% composite exhibited optimal quasi-static strength (44.76 ± 0.25 MPa), a 4.0% improvement over the neat epoxy (43.04 ± 0.33 MPa). While all composites showed positive strain-rate sensitivity, nano-Al2O3 incorporation generally reduced dynamic strength, except for the 5 wt% composite at intermediate rates. Notably, the 15 wt% composite recovered to 78.49 ± 0.48 MPa at 1600 s−1 due to high-rate energy dissipation mechanisms. Microstructural analysis revealed a transition from brittle cleavage to a hybrid fracture mode dominated by microvoids and localized plastic tearing. This work quantitatively defines the optimal loading window for nano-Al2O3/epoxy composites in protective engineering.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: