Answers are grounded in this paper and cite their sources.
Demonstrates enhanced strength and ductility in aluminium alloy joints using plasma spraying and quasicrystals, suggesting improved industrial applications.
The synergistic enhancement of strength and ductility represents a key objective in the development of engineering structural materials. However, these two properties often proceed in opposing directions, making it difficult to achieve both simultaneously. In this work, a strategy for fabricating Al-Cu-Fe-La quasicrystal particle-reinforced 6061 aluminium alloy butt joints is proposed by the conjunctive use of plasma spraying and friction stir welding. Compared to conventional FSW joints without PS, the PS + FSW joints exhibit finer grains and higher geometric dislocation density in the stir zone. The optimized joint achieves a tensile strength of 177.63 ± 3.54 MPa and an elongation of 17.73 ± 0.86%, which are higher than those of the unreinforced joint, demonstrating a favorable strength-ductility synergy. The findings of this research indicate that the combined PS + FSW process effectively enhances both the strength and ductility of butt joints, while simultaneously broadening the scope of quasicrystalline alloys for industrial applications.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: