Answers are grounded in this paper and cite their sources.
Investigates heat transfer and shell formation in 20Mn23AlV steel, suggesting optimized mold flux benefits.
The interfacial heat transfer and initial shell formation behavior of a conventional CaO–SiO 2 ‐based mold flux (Flux A) and a low‐reactivity CaO–Al 2 O 3 ‐based mold flux (Flux B) were investigated using a mold simulator for 20Mn23AlV steel. Flux B exhibited a higher melting temperature range of 873.6–1258.7 °C than Flux A (803.3–1201.2 °C), while maintaining a lower viscosity of 0.08 Pa s at 1300 °C, indicating superior high‐temperature rheological performance. Mold surface temperatures and heat fluxes in the mold simulator tests were analyzed through a 2D‐inverse heat conduction program combined with fast Fourier transformation analysis. Below the meniscus, Flux B generated larger high‐frequency temperature amplitudes but smaller standard deviations, demonstrating a more synchronized and spatially uniform thermal response. Correspondingly, the high‐frequency heat flux amplitudes near the meniscus were reduced compared with Flux A, revealing an enhanced buffering effect on transient heat transfer. These results indicate that the optimized CaO–Al 2 O 3 ‐based flux exhibits improved rheological behavior, leading to a more uniform slag film, more stable heat transfer near the meniscus, and more consistent initial shell growth. The findings provide insights into the role of low‐reactivity mold fluxes and offer guidance for flux optimization in the continuous casting of 20Mn23AlV steels.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: