Answers are grounded in this paper and cite their sources.
Numerical investigation reveals how blockage ratio impacts combustion efficiency in an integrated cavity-strut system, indicating design implications.
Driven by the demand for wide-speed-range air-breathing propulsion, this study numerically investigates the effect of blockage ratio on the non-reacting flow field, fuel-air mixing, and combustion mode transition in an integrated cavity-strut dual-mode ramjet (DMR) combustor under inflow conditions corresponding to a flight Mach number ( Ma ) of 4.0. Three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Eddy Dissipation Model (EDM) and a single-step global kerosene-air reaction mechanism are employed, and the numerical approach is validated against published experimental data. The results demonstrate that the integrated cavity-strut configuration significantly enhances cavity recirculation and fuel-air mixing compared with the cavity-only configuration, thereby improving flame stabilization and combustion efficiency. The blockage ratio is identified as a key parameter governing the interaction between the cavity recirculation zone and the strut-induced flow structures, thereby affecting mass transport, fuel-air mixing characteristics, and combustion mode distribution. Moderate blockage ratios of σ = 0.08 and 0.10 generate relatively large recirculation zones and more uniform kerosene distribution inside the cavity, resulting in transition-mode combustion and the highest combustion efficiency of approximately 70%. In contrast, σ = 0.06 leads to insufficient heat release and scramjet mode owing to the weak cavity-strut interaction and limited fuel residence time. Although σ = 0.12 achieves a high mixing efficiency of 87%, the excessive blockage strengthens the mainstream flow and deteriorates fuel penetration, causing local fuel-rich accumulation and reduced combustion efficiency. Therefore, an appropriate blockage ratio enhances fuel-air mixing and combustion efficiency, providing critical design guidance for the integrated cavity-strut DMR combustor development.
No takes yet. Share an insight, caveat, or question.
Chang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: