Key points are not available for this paper at this time.
The integrated design of multibypass augmented/ramjet combustors can reduce the weight of turbine-based combined cycle (TBCC) engines and improve the thrust-to-weight ratio, but low-resistance mixing and efficient stable combustion of multiple airflows over short distances are necessary prerequisites. In this study, a novel structure for a TBCC multibypass integrated augmented/ramjet combustor is proposed. The influence of the inlet aerodynamic parameters on the flow field, mixing efficiency, flow loss, and combustion performance of the combustor under different working modes was obtained via experimental and numerical methods. The experimental results show that the outlet mixing efficiency is greater than 86% in the double-bypass mode (DB-mode). While the triple-bypass mode (TB-mode) has a larger decrease, the total pressure loss is slightly reduced (by approximately 0.5%). The opening of the ram duct has a significant impact on the flow field, resulting in different rules for the influence of the inlet temperature on the outlet mixing efficiency: in the DB-mode, the mixing efficiency decreases with increasing inlet temperature, while the rule is completely opposite after entering the TB-mode. Because the dominant role of the two mixing zones in the flow field changes with the velocity, the inlet velocity has a significant impact on the mixing efficiency in the flow direction. The combustion simulation results show that the combustion efficiency in the DB-mode is almost always above 90% and the high-temperature zone is mainly concentrated downstream of the integrated strut. The radial temperature gradient increases and the combustion efficiency decreases in the TB-mode.
Ren et al. (Mon,) studied this question.