Answers are grounded in this paper and cite their sources.
Examines effect of structured grinding tools on performance in machining aluminum, indicating tailored designs improve outcomes.
The growing demand for customized and high-performance machining solutions has stimulated the development of innovative abrasive tool designs and manufacturing approaches. In this study, grinding tools were fabricated using vat photopolymerization additive manufacturing with a custom silicon carbide (SiC) reinforced photopolymer composite. Three tool architectures were investigated: a standard continuous tool (ST), a tool with internal cylindrical cooling channels (CCT), and a surface-structured tool containing 100 V-shaped grooves (T100). Grinding experiments were performed on Al6061 using a full factorial design to evaluate the influence of tool geometry, depth of cut, and feed rate on grinding forces, temperature, surface roughness (Ra), and volumetric wear. The results show that engineered internal and surface features significantly influence grinding behavior by modifying coolant accessibility, chip evacuation, and the effective tool–workpiece contact conditions. Among the tested designs, the T100 tool achieved the best finishing performance with a minimum Ra of 0.29 µm. The CCT configuration reduced grinding forces under moderate operating conditions and facilitated coolant access, while the ST tool exhibited comparatively stable mechanical behavior and the lowest temperature and wear values under its optimal conditions. To support application-oriented tool selection, a multi-criteria decision-making (MCDM) framework was applied to simultaneously evaluate grinding forces, Ra, and tool wear. The analysis revealed that no single tool design is optimal for all criteria: the T100 tool is preferable for high-quality surface finishing, whereas the ST tool provides more balanced performance in terms of thermal behavior and durability. These results demonstrate the capability of additive manufacturing to produce functionally structured abrasive tools and highlight how tool architecture can be tailored to meet different grinding performance objectives for soft aluminum alloys.
No takes yet. Share an insight, caveat, or question.
Houshmand et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: