Answers are grounded in this paper and cite their sources.
To implement an energy-efficient combination of CO 2 capture technology, the pilot plant studies were conducted in preparation of commercialization of CCUS demonstration plants, during which a set of specific amine blends with various catalytic packing was employed. To achieve the best performance in a novel hot silicon oil-based lab-scale CO 2 absorption–desorption pilot facility, this study focused on the steady-state CO 2 absorption–desorption performance of the trisolvent MEA (monoethanol amine)-EAE (2-(ethylamino)ethanol)-DEEA ( N, N -diethylethanolamine) at a specific concentration of 4.5 mol/L, with the combination of two types of solid base catalysts (CaCO 3 and CaMg(CO 3 ) 2 ) and solid acid catalysts (HND-580 and HND-8) under specific operation conditions. Evaluation of the steady-state analysis was based on three key parameters: absorption efficiency (AE), cyclic capacity (CC), and heat duty (HD). Results indicated cyclic capacity enhancement and significant heat duty reduction with solid acid–base catalysts compared to noncatalytic benchmarks. The optimal concentration ratio was 0.5 + 2 + 2 mol/L MEA-EAE-DEEA, with the addition of 150 g of HND-8 + 40 g of CaMg (CO 3 ) 2, an F G of 8 L/min, and an F L of 60 mL/min. Under the optimized conditions, the heat duty was decreased from 3.0 to 2.46 GJ/t CO 2 over the noncatalytic benchmark.
No takes yet. Share an insight, caveat, or question.
Li et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: