Answers are grounded in this paper and cite their sources.
Fast-neutron irradiation decreases the carrier concentration of polycrystalline samples of n- and p-type GaSb, indicating the production of low-lying traps. Vacuum heat treatment evidently removes such traps but also introduces additional acceptors, indicating a different rate of annealing for bombardment produced interstitial and vacancy atoms. Irradiation and heat treatment of n-type GaSb therefore results in the production of material of lower carrier concentration and reirradiation results in the conversion to p-type material. Repeated irradiations followed by heat treatments, however, do not reduce the net effective concentration of electrons in n-type material below {~}5×{}10¹⁷ cm^-3. The mobility of all samples is decreased by bombardment. Heat treatment subsequent to irradiation increases the mobility of n-type material but decreases the mobility of p-type samples still further below the decrease produced by bombardment. Low-temperature (-125^∘{}C) irradiation and subsequent warm-up and cool-down curves indicate the presence of defects of low thermal stability. No evidence was obtained for regions of low resistivity resulting from superlattice disordering as a result of quenching as might be expected from the thermal spike picture. The type and position of fast-neutron-introduced lattice defects is discussed with relation to previous models for Ge and InSb.
No takes yet. Share an insight, caveat, or question.
Cleland et al. (1955) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: